Product Description
This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but features the same operational characteristics. The KAM4P-MH includes a medium-length (3.5 inch) harness with 8-pin NMRA plug at the end.
- Keep-Alive®: Included on-board for smooth, stutter-free operation.
- Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
- Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
- DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
- Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
- Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
- Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
- Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
- Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
- Airwire™ Compatible: Fully compatible with Airwire™ operation.
- User-Loadable Speed Tables:Configure custom speed curves and set speed limits.
Specs:
- Interface Type Direct-Plug (8-Pin NMRA)
- Dimensions (L x W x H): 0.945" x 0.657" x 0.33" or 24mm x 16.7mm x 8.38mm
- Scale: HO Scale
- Continuous/Peak: 1.0/2.0 Amp
- Total Functions: 4
- Function Rating: 200 mA
- 12V Outputs: 4
